Residential
Residential
- Removal and Replacement (RR)
- New Constructions (ND)
- Grade and Pave (GP)
- Overlay (OL)
Lorem ipsum dolor sit amet elit tellus luctus nec ullamcorper mattis, pulvinar dapibus leo.
Is a full-service asphalt company offering everything from seal-coating to new construction. All asphalt work is done by our employees specifically trained for each task.
Lorem ipsum dolor sit amet elit tellus luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet elit tellus luctus nec ullamcorper mattis, pulvinar dapibus leo.
- 2D Floor Plans
- 3D Elevation Designs
- Civil Construction
- Architectural Design
- 2D Interior Design
- 3D Interior Design
- Structural Design
- Electrical & Plumbing
- Compound Wall
- Elevation
- Internal Isometric Views
- Fabrication
Minimum charges apply to all of the above services. Our residential service area is limited http://bcblacktop.com/about-us/service-area/. Please fill out the form to the left for a free estimate or call us at 614-888-7070 for more information. Also see our Residential Frequently Asked Questions page.
When properly constructed and cared for, asphalt driveways will give several years of service. However, every product has a life expectancy, and this is as true for asphalt driveways as for anything else. When a driveway reaches a certain level of deterioration, the best remedy is to remove it, rebase it (add additional limestone if necessary) and install 2″ to 4″ of new asphalt depending on the traffic. This effectively provides the homeowner with a new driveway.
When properly constructed and cared for, asphalt driveways will give several years of service. However, every product has a life expectancy, and this is as true for asphalt driveways as for anything else. When a driveway reaches a certain level of deterioration, the best remedy is to remove it, rebase it (add additional limestone if necessary) and install 3 inches of new asphalt done in 2 separate lifts.
Many homeowners initially opt for a simple gravel driveway. However, over time the disadvantages of this solution become apparent, and they seek a better solution, i.e., having the driveway paved. Since gravel driveways have often been in place several years and, since several loads of gravel have usually been brought in to rejuvenate it, a stone base has been established. We would add #304 limestone as needed, regrade and pave the driveway with an average finished thikness of 3 inches done in 2 separate lifts.
Seal-coating is the most common residential driveway procedure. However, doing the job correctly is key to a successful application. Seal coating should never be done until the ambient day and evening temperature(s) are 55 degrees Fahrenheit. Otherwise the seal-coat doesn’t cure properly and the sealer will have a tendency to wear off much more quickly than it should. Application procedures may differ, but the importance of using the right product cannot be overstated. B&C Blacktop Sealing, Inc
